Prius Retrofit Source HIDS

Prius Retrofit Source HIDS

This package label will be very helpful.

 

If you're struggling to get the power wire onto the battery the black piece comes out.


Like so

 Under the OEM headlight is a spot for the OEM ballast but ours is smaller so I used the middle screw to attach the ballast then using short self tapping screws for the other holes.

 
 No the screws did not cause any damage.

I used this bolt on the left for the ground.

Next I mounted the control box and wrapped in electric tape.

At some point you need to take the OEM headlight bulb plug and plug right into the kit to trigger the lights on. I tapped up this connection as well.

Here is the old bulb coming out.

Sadly the kit did not come with gaskets so I had to cut the factory one a bit. I covered the holes in silicon after.

LEFT is OEM RIGHT is HID

Excuse the dirty headlights.

Other Side

Ran the wire to the other side through the bumper middle bar.

  

 

Tried a 4300K on the left and a 5000K on the right. Ended up keeping the 5000K

 
 

Put everything back together.

Adjust the lights too.